Видео

Amazingly detailed video. Nothing cut out which is very common with these videos! Just carried out the job myself for the price of a £10 cable, surely would have been £100+ in labour. Thank you!

please tell me, Ford Galaxy 1.8 tdci, I can’t understand at what temperature the fan turns on, and why the scanner shows a temperature 15 degrees higher than the test on the dashboard 

Just replaced my bonnet catch having studied your video. Garage quoted me £80 plus VAT to do it, after learning from you, a replacement catch from e-bay at £12.95 job done! Thank you so much, awesome teaching.

Great video, i wasn't to sure if the alternator would come out. Just done mine on my Galaxy 1.8 tdci 07 plate

The bolt holding my shock is stuck to a nut which is welded to the frame. What I did to loosen it was to use a Dremel with an EZ456 cutting disk to cut a slot in the nut. Then I applied some penetrating oil and it loosened up. You don't need to cut through the whole thing right away. Unfortunately, the bolt is also seized to the bushing and I don't think a cutting disk can full break that open. I'm still working on it.

Excellent video sir

Was gonna instal it on my mondeo from 2007. Problem is a different wiring. There is about 10 yellow wires. So no folding mirrors for me on the alarm fob.🙃

Great real video. In a week, i hope to have replaced all 4 springs on my mk4. The video shows that it isnt completely necessary to compress the rear springs before removing them, but the front ones have to be compressed , eventually after removing the completely strut included the hub first. Cautions is important

Cracking job on that 👏

What the viscosity of oil

Looking good mate

Looking good Chazz 👍

You made that look easy - I’ve never had much luck with easyout bits

Da kann man auch direkt die beiden hinteren Querlenker mit neu machen. Sind doch eh schon halb vergammelt.

Did you do this job from the top of the car or from underneath?

Are u in london

Easy and fast

HI. what happens with ford voice command? does it continue to work?

Nice one mate and thanks for the great job. 👍

Hello do you still get parking sensors noises through the speakers

Where did u get that steel piece from with the holes on to hold it

Just did this now. Took over 2 hrs. Without this video, this job would have been a nightmare. Thanks

How do you tell if they need to be replaced, do they make sounds ind if so what kind of sound should i listen for? I suspect driving over speedbumps wll trigger the sound?

jesus you m,ade that look harder than it is decent video though mate

Spray every rusty nut and bolt with penetrating spray and clean with wire brush b4 attempting removal👍

Those rivets could also be drilled out using ideally a pillar drill but a normal drill will do it.

How can I get the boot logo? I don't have the option on my radio. Is there an app to download.

How’s the solar garage going? How is the battery holding up?

Doing a fine job there matey keep it up but don’t over do it with the nee

Hi bro its getting there bit by bit i`m loving the music and seeing my little mate but one thing this knee issue count yourself lucky i didnt run you over with my scooter lmao

Get well soon mate messy job that seam sealant stuff

Rear bolts in a real pain in some places written makes us banned. Perfectly fun on a Saturday with over torqued 18mm bolts and a worse ball joint in this video. Managed to get it off by loosen the nut instead. Now I see the light at the end of the tunnel.

Is it normal that youtube and anything running from the hotspot is very slow. I've justs set mine up but it's really slow. Looks nice just wish it was a bit faster.

nice

Thanks mate

Very beautiful cat aweh!

Just randomly popped into my feed honestly so wholesome, that’s a proper British cat that is if he has no owner and is a stray id say keep em he likes you

You are very good, well informed, and a very good cameraman

Can you please post more videoes on tow bar installment?

Hi nice vid on the last injector I cut the rocker pipe back abit to pull it out hope that helps

Hi bro it's going to look mint when done you can put the seam sealer on anyway as long as its covered but I think primer first but don't matter really still will do the same job skippy

Good job chazz I would do it the same way you have done it 👍

Looking great bro

I think seam sealer causes rust

thanks mate, just what i needed

You’d be better doing the whole underside

What size were they? Please

Drill out the old one and screw in the new one!! Why touch the lever?!(

Do you need to code the new injector in?

Ill use this video to clean the cruise controls on my smax since the only work intermittently so could just be dirty inside unless you know different cheers